| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE POWER CORD FROM THE CORD HOOK.
|
| 2 |
|
UNHOOK THE VAC HOSE FROM THE HOSE HOOK.
|
| 3 |
|
SLIDE UP ON THE BAG COVER LATCH. PULL THE BAG COVER FROM THE MACHINE.
|
| 4 |
|
PUSH IN ON THE RED LEVER ON THE RIGHT SIDE TO UNLOCK THE BAG.
|
| 5 |
|
PULL THE BAG DOWN OFF THE INTAKE HOSE.
|
| 6 |
|
REMOVE THE 4 SCREWS HOLDING THE UPPER VAC HOUSING.
| Screwdriver-phillips |
|
|
| 7 |
|
PULL THE UPPER VAC HOUSING UP TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 8 |
|
LOOSEN THE 2 SCREWS HOLDING THE GUIDE HOUSING.
| Screwdriver-phillips |
|
|
| 9 |
|
PULL UP ON THE TOP OF THE UPPER VAC HOUSING TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 10 |
|
LOCATE THE 3 WIRES ATTACHED TO THE VAC MOTOR. 2 BLUE WIRES AND 1 GREEN/YELLOW WIRE. LOOSEN THE SCREW ON THE TERMINAL BLOCK FOR THE BAD WIRE. FOLLOW THE WIRE TO THE VAC MOTOR AND PULL TO DISCONNECT THE WIRE CONNECTOR FROM THE VAC MOTOR. REPLACE THE WIRE WITH NEW WIRE AND/OR NEW WIRE CONNECTORS. REVERSE STEPS 1 THRU 9 TO REASSEMBLE THE MACHINE.
|